Gas cylinder valve connections: thread and DIN 477 number by gas and country

CO2 and argon cylinders in Germany and Poland have a W21.8×1/14″ external thread, DIN 477 No. 6. Nitrogen uses W24.32×1/14″ (No. 10) and oxygen G 3/4″ (No. 9). Italy and Spain use their own outlets for some gases. Pick a gas and a country. You will see the outlet, the regulator that fits it and how solid the source is.

Find the valve outlet

Gas
Country

Covers 150 and 200 bar cylinders for industry, welding, drinks and aquariums. For 300 bar, see below the table. Medical cylinders are not covered.

Usual valve outlet · CO2 · Germany

W21.8×1/14″

Thread on the valve
male (external thread)
Standard
DIN 477-1 No. 6
Regulator that fits
Regulator with a W21.8×1/14″ union nut (DIN 477-1 No. 6)

Source: standard table, gas supplier catalogue or national regulation.

Your cylinder from intergases.com

CO2 from intergases.com: W21.8×1/14″ male (external thread), DIN 477-1 No. 6 (PL/DE standard). This is the usual outlet in Germany. A regulator for this gas bought there will fit.

Rendering of the valve on our CO2 cylinder. Outlet W21.8×1/14″, DIN 477-1 No. 6.
Valve of our CO2 cylinder with the outlet cap off: W21.8×1/14″ male thread, DIN 477-1 No. 6.

Cylinders for this

Filled cylinders shipped from our warehouse in Poland, buyable online.

2 kg CO₂ cylinder

The 2 kg CO₂ cylinder with filling

  • Food-grade CO₂ (E290), 2 kg in a 2.7 L steel cylinder
  • Standard W21.8 valve: fits regulators, beer taps and, with our adapter kit, SodaStream Quick Connect machines (Terra, DUO, Art)
  • Refill by post through our refill service

Shop by use: CO2 cylinder for SodaStream · CO2 cylinder for beer taps · Welding gas cylinders

Valve outlets for all gases and countries

150 and 200 bar cylinders. ext. = external (male) thread on the valve, int. = internal (female) thread. All threads are right-hand. Tap a cell to load it into the finder.

GasPolandGermanyItalySpainRomaniaGreece
CO2
Argon
Helium
Argon/CO2 (M20, M21)
Argon/O2 (M13)
Nitrogen
Food nitrogen E941
Oxygen

* Common market practice (no primary source). Shaded: differs from the DIN 477-1 outlet on our cylinders. Italy: UNI 11144. Spain: coupling type under ITC EP-6.

DIN 477 numbers explained

DIN 477-1 sets the valve outlets for cylinders up to 200 bar in Germany. The Polish market uses the same outlets. DIN 477-5 covers 300 bar. Each number stands for one thread, and each thread belongs to one gas group.

NumberThreadGases
DIN 477-1 No. 6W21.8×1/14″ ext.Argon, helium, CO2, argon/CO2 and argon/O2 mixes up to 21 % oxygen
DIN 477-1 No. 9G 3/4″ ext.Oxygen and mixtures with more than 21 % oxygen
DIN 477-1 No. 10W24.32×1/14″ ext.Nitrogen
DIN 477-5 No. 54W30×2300 bar: argon, nitrogen, helium
DIN 477-5 No. 56W30×2300 bar: compressed air
DIN 477-5 No. 59W30×2300 bar: oxygen

Under DIN 477-5, 300 bar cylinders have a W30×2 outlet. A 200 bar regulator does not fit them. This page does not cover Italian and Spanish 300 bar outlets. In the United States, cylinders use CGA connections (CGA 320 for CO2, CGA 580 for argon, helium and nitrogen, CGA 540 for oxygen). These do not fit European outlets.

Why the outlets differ per gas

The outlets are different on purpose. A regulator made for one gas, or for a lower pressure, should not fit a cylinder of another gas or a higher pressure.

  • Never connect a regulator to an outlet it was not made for. The British Compressed Gases Association says: “It is NEVER acceptable to use adaptors or to modify regulators” (BCGA TIS 10, 2023).
  • The Asia Industrial Gases Association says adaptors defeat the purpose of gas-specific outlets. They have caused serious incidents in which incompatible gases were mixed or the wrong gas was filled (AIGA 098/17, section 7).
  • Check the pressure. The regulator’s maximum inlet pressure must be at least the working pressure on the cylinder label.
  • For oxygen, use a regulator made and marked for oxygen, and keep it free of oil and grease. Never move a regulator from another gas to oxygen.
  • If the outlet on your cylinder does not match your regulator, get a regulator for that outlet or ask your gas supplier.

How we built the table

For each gas and country we checked the standard tables (DIN 477-1 and -5, UNI 11144), gas supplier catalogues and data sheets, and the Spanish regulation. If only distributors and regulator makers agree, we mark the cell as common market practice. If we found nothing reliable, we say so and show no outlet.

Sources: DIN 477-1 table (gewindebohrer.de); Hornung outlet chart (DIN 477-1 and -5); Linde Gaz Polska product catalogue; Air Liquide Polska; UNI 11144:2005 table (MyGasSite); Veneta Collaudi product pages; ITC MIE-AP7 Norma 3 and a Linde España data sheet (ITC EP-6); Romanian and Greek distributors (ebutelii.ro, gaztehnic.ro, gtc-hardware.gr); BCGA TIS 10 rev. 4 (2023); AIGA 098/17. Research of October 2026.

Frequently asked questions

In Germany, Poland, Romania and Greece a CO2 cylinder has a W21.8×1/14″ external thread, DIN 477 No. 6. Italy (W21.7×1/14″, UNI 11144 type 2) and Spain (type C) use the same thread in practice. Our 2 kg CO2 cylinder has this valve. For SodaStream Terra, DUO and Art there is a hose kit with a Quick Connect plug.

It means 21.8 mm outside diameter and 14 threads per inch, right-hand. Under DIN 477-1 it is No. 6, the outlet for argon, helium, CO2 and argon welding mixes on 200 bar cylinders in Germany and Poland. US cylinders use CGA connections such as CGA 580 instead. They do not fit this thread.

The different outlets stop a regulator for one gas from going onto another. Nitrogen has W24.32×1/14″ (DIN 477 No. 10) and oxygen G 3/4″ (No. 9). An oxygen regulator must be free of oil and grease. A regulator that was used on another gas can ignite under oxygen pressure.

No. Gas associations (BCGA TIS 10, AIGA 098/17) say adapters between non-matching outlets are not acceptable. An adapter removes the protection against the wrong gas and the wrong pressure. Buy a regulator for the outlet on your cylinder. Our SodaStream kit is a hose with the W21.8 nut on one end. It connects a CO2 cylinder to a CO2 machine.

Our cylinders have DIN 477-1 outlets. CO2 fits in both countries. Argon, helium and mixes fit Spanish regulators (type C) but not Italian ones (W24.51×1/14″ female). Nitrogen and oxygen fit neither Italian nor Spanish regulators. For nitrogen, use a DIN 477 No. 10 regulator. For oxygen, use a No. 9 oxygen regulator.

Embed this calculator

You may embed the calculator in blogs, forums and guides for free, without signing up. Please keep the credit line.

Included in the code: “Calculator by intergases.com”
Credit preview
Calculator by intergases.com

This page is a guide only. Always go by the marking on the cylinder valve, your gas supplier and the regulator maker’s instructions. Medical cylinders with pin-index valves are not covered.